P4BVLL - ETOP ELECTRONICS P4BVLL Pentium 4 AIO PICMG SBC with VGA...
Request Quote
For Price
- Part Number:
- P4BVLL
- Model Number:
- P4BVLL
- Make:
- ETOP ELECTRONICS
- Lead Time:
- Available
- Qty In Stock:
- Available
ETOP ELECTRONICS P4BVLL Pentium 4 AIO PICMG SBC with VGA / Dual LAN Simple Type: CPU Board
For Resellers and High Volume Orders:
Please request a quote to obtain preferred pricing.
Features
- ATI RADEON-7000M 3D Graphic engine delivers Best-in-the-class graphics performance. Independent 16MB frame buffer design gives NO impact to system memory bandwidth.
- Dual Intel Fast Ethernet controller on board. Support TCP/IP checksum offloading to minimize CPU utilization.
- On-Board AT-P8 and ATX-12V Power connector support stand-alone system configuration.
- One DVI Interface support direct drive LCD monitor with best display quality.
- Pentium-4 grade cost-effective Full-size PICMG CPU card solution.
- Support Hardware Monitor and Watch-Dog timers. System will alert administrators while abnormal operation condition happened.
- Support Pentium 4 Prescott (90nm) 2.4GHz and 2.8GHz with 533MHz FSB and 1MB L2 cache.
- Support Server-grade LAN features like Teaming and Fault-Tolerance in wire-speed.
Specifications
- 10/100Base-T Ethernet: Two Intel 82551GM LAN controllers- Compliant with IEEE802.3u, support IEEE 802.1Q VLAN, 802.1P priority packets, 802.1X flow control and 10/100M auto-negotiation.- Dual-LAN design for fault-tolerance and Load-Balancing networking
- AGP VGA: ATI RADEON-7000M 3D chipset with 16MB SGRAM on-board.- Support AGP 4X mode operation. - One DVI I/F connector for LCD panel and DVI 1.0 support
- BIOS: Award ACPI BIOS on 4M-bit Flash ROM.- Flash EEPROM update utility available. - PXE & RPL Boot Agent are integrated in system BIOS
- Chipset: Intel 845E +ICH2 Chipset
- CPU: Intel Pentium 4 Northwood and Prescott Processor, up to 3.06GHz.- FSB speed 400/533MHz Selectable by Jumpers.- Support Prescott (90nm) 2.4G and 2.8GHz with L2
- CPU Socket: mPGA-478 Socket
- Dimensions: 338mm x 122mm (13.3"x 4.8")
- Form Factor: Full size PICMG 2.0 Compliant
- Hardware Monitoring: PC Health Monitoring ASIC on-board to monitor system power rails, FAN speed as well as CPU and system temperatures
- IDE: Two Bus Master EIDE Channel support PIO Mode 3/4, Ultra DMA33/66/100 IDE HDD, ATAPI CD-ROM and LS-120 drive.- Support up to 4 devices
- LAN Management: DMI2.0 and WfM 2.0 (wire for management) compliant.- Supports Intel LANDesk Service Agent Rev 6.0
- Operating Temperature: 0XC~60XC (32XF~140XF)
- Power Consumption: 5A @ +5V(Typical) ; 6A @ +12V (Typical); 100mA @ -12V
- Processor: Intel Pentium 4
- Relative Humidity: 10%~90% (non-condensing)
- Storage Temperature: -20XC~80XC (-68XF~176XF)
- Super Multi I/O: Winbond W83627 Super I/O controller Support:- 1x IrDA.- 2x Serial ports. - 1x Parallel port (SPP/EPP/SCP).- 1x FDD port, support up to Floppy drives.- 1x PS2 KB and 1x Mouse
- System Memory: Two 184-pin DDR DIMM sockets support DDR200 and DDR266 SDRAM.- The memory size can be up to 2.0GB in total.- Supports both ECC and non-ECC function
- Watchdog Timer: Programmable watchdog timer from 8~90 seconds- Timeout event can be Reset system or NMI
Applications
- None Available
Aliases
- None Available