P/I-P4BVLL - Etop Electronics P/I-P4BVLL Single Board Computer. Pentium 4 AIO Support | VGA

P/I-P4BVLL - Etop Electronics P/I-P4BVLL Single Board Computer. Pentium 4 AIO Support...

Request Quote
For Price

Part Number:: P/I-P4BVLL
Model Number:: P/I-P4BVLL
Make:: ETOP ELECTRONICS
Lead Time:: Available
Qty In Stock:: Available

Etop Electronics P/I-P4BVLL Single Board Computer. Pentium 4 AIO Support | VGA | Dual LAN Simple Type: CPU Board

The P/I-P4BVLL is a Pentium 4 Industrial single board computer (SBC) card based on Intel 845D chipset and is fully designed for harsh industrial environment. It features one 478-pins Socket, that is compatible with Intel uFC-PGA package Pentium 4 processor. This card accommodates up to 2GB of DDR266 SDRAM memory. The P/I-P4BVLL is a high integration design. Two Intel 82559 Fast Ethernet Controllers and ATI 3D Rage128 Ultra 4XL AGP VGA controller are integrated into the system. The high-integration design prevents the system compatibility issues and increases the PCI add-on cards scalability. This makes P/I-P4BVLL an ideal SBC card for CTI, ISP servers, workstations, automation as well as other industrial applications. P/I-P4BVLL provides the most complete features needed for system operation. These include 10/100 TX LAN adapter, Ultra DMA 66/100 IDE drive controllers, high performance serial ports, enhanced parallel port, and the most updated BIOS. Four USB ports and a programmable watchdog timer are available on-board. The CPU card Chapter 1 Introduction P/I-P4BVLL User`s Manual 3 also provides a reserved pin header for connecting a Panel Link Digital interface LCD Monitor (DVI or DFP interface). What’s more, the Intel 845D on-board the CPU card incorporates the latest microprocessor technology to provide the increased bandwidth needed to operate your system bus at speeds up to 133 MHz. The P/I-P4BVLL comes with integrated hardware monitoring device that monitors system and CPU temperature, voltages of all system power rails, and CPU fan speeds to prevent system crashes by warning the user of adverted conditions. The power management feature provides power savings by slowing down the CPU clock, turning off the monitor screen and stopping the HDD spindle motor.

For Resellers and High Volume Orders:
Please request a quote to obtain preferred pricing.

Features

10/100Base-T Fast Ethernet: Features two Intel Fast Ethernet controllers that boost network performance, increase the networking bandwidth and reliability, enhanced system manageability and offers the
ATI AGP VGA Chipset: Features ATI Rage128 4XL AGP chipset with 16MB SDRAM on board, that support high-performance 2D and 3D graphic as well as DVD / MPEG-2 decode assist
compatible serial ports and one parallel port with SPP, EPP and ECP capabilities.
Concurrent PCI: Allows multiple PCI transfers from PCI master buses and AGP bus to memory to CPU.
ECC function support: Processor front-side bus (FSB) and Memory subsystem support ECC function for Fault-tolerant application.
Enhanced ACPI: Features a programmable BIOS (Flash EEPROM), Offering enhanced ACPI for Windows compatibility and auto-detection of most devices for virtually automatic setup.
Hardware Monitoring: Features integrated Hardware Monitor to monitor all the power rails as well as CPU and board temperature.
High-Speed Processors: Supports latest Intel Pentium 4 Processor from 1.4G to 2.2GHz or above with 400MT/s and 533MT/s FSB Speed.
Intel 845D Chipset: Features Intel 845D Brookdale chipset with I/O subsystems and front-side bus (FSB) platform, which boosts the traditional 100/133MHz internal bus speed to 400/533MT/s.
IrDA: Support an optional infrared port module for wireless interface.
PC2100/PC1600 DDR Memory Support: Equipped with two DIMM sockets to support DDR200 or DDR266 SDRAMs with 128M, 256M, 512M or 1GB size each, Up to 2GB of PC2100 system memory.
PCI Bus Master IDE Controller: Two enhanced IDE channels for up to four devices, support PIO Mode 3/4 or
Robust Heatsink retention: Heatsink retention module with metal back plat to hold the heatsink firm on SBC.
Super Multi-I/O: Provides two high-speed UART
Ultra ATA33/66/100 IDE Hard Disk, ATAPI CD-ROM and LS-120 drive.
Watch-Dog Timer: 4 level programmable watchdog timer, from 10-80 seconds.

Specifications

General

AGP bus VGA: ATI RAGE128 Ultra 4XL chipset; Support 16MB SDRAM frame buffer, which runs on 133MHz speed and provides bandwidth up to 1GB/Sec.; 1.5V AGP 4X mode offers a peak bandwidth in excess of 1GB/s; Support DVD and video with enhanced motion compensation accelerator; Incorporated 2D and 3D acceleration engine; 300MHz DAC supports 90Hz refresh at 1600x1200x32bpp resolution; 2D display mode / refresh rates
ATX Power Supply support: On-borad 4-pin ATX power supply header (requires the passive backplane supports ATX power supply); On-board power button header for Soft power off, i.e. front panel turn off system power.; Support Win95 and Win98 shutdown automatically turn off the system power.; Instant-off or delay-4-seconds selectable via BIOS setup.; Hardware Monitor System; PC Health Monitoring ASIC supports system power voltages, FAN speed and system temperatures monitoring.; One FAN connector and one thermal couple header reserved for chassis FAN and temperature monitoring.
BIOS: Award BIOS, PnP support; FLASH EEPROM (512KB) for BIOS update; Enhanced ACPI BIOS and DMI 2.0; ISA Plug and Play (PnP) extension; Power management; Anti-Boot Virus; Intel 82559 Boot-ROM
Board Type: Full Size
Chipset: Intel 845D Brookdale and ICH2 Chipset with EIDE, USB, and RTC built-in.
Dimensions: 13.3"(L) x 4.8"(W) or; 338mm (L) x 124mm (W)
DiskOnModule: The DiskonModule(DOM) flask disk supports system boot and storage capacity from 8MB to 512MB.
DMI BIOS Support: Desktop Management Interface (DMI) allows users to download system hardware-level information such as CPU type, CPU speed, internal/external frequencies and memory size.
Enhanced IDE: Two Bus Mastering EIDE mode, up to 4 devices, Two EIDE interfaces for up to four devices, support PIO Mode 3/4 or Ultra ATA33/66 /100 IDE Hard Disk, ATAPI CD-ROM and LS-120 drive
FDD Interface: Two floppy drives (360KB, 720KB, 1.2MB, 1.44MB, 2.88MB)
Green Function: Power management via BIOS, activated through mouse/keyboard movement or SMI button
Humidity: 5% to 95%
IrDA Interface: Pin-header connector for the optional IrDA external connector
Keyboard Mouse Connectors: One 6-pin mini-DIN connector is located on the mounting bracket for easy connection to a keyboard and PS/2 mouse. A 5-pin on-board keyboard pin header connector is also available to support PC/AT style external keyboard connector on backplane.
Memory Sockets: Two 184-pin 2.5V DDR DIMM sockets
Memory types: 2.5V DDR SDRAM (Synchronous DRAM) support 64MB to 1GB memory capacity.; NOTE: Only SDRAM modules that support SPD (Serial Presence Detect) should be use. Use PC2100 modules when running DDR266 Memory bus speed and use PC1600 or PC2100 modules when runningDDR200 memory bus speed.
Parallel Port: One high-speed parallel port, SPP/EPP/ECP mode
PICMG Compliance: Fully compliant to PICMG 2.0 standards.
Power Supply: 12A@ +5v typical; 10A@ +12v typical 100mA@ -12V typical; 200mA@ +5VSTB (Option)
Processor: Intel 478-pins Pentium 4 CPU. Support both Willamette(0.18u process) and Northwood(0.13u process) CPU.
Processor Socket: Socket478 for latest Intel Pentium 4 CPU.
Secondary Cache: 512K (Northwood) or 256KB (Willamette) L2 cache integrated in CPU and runs on CPU core frequency.
Serial Port: Two 16550 UART compatible ports with COM1 and COM2 as RS232
Temperature: 0 ° C to 60 ° C operating; -40 ° C to 70 ° C storage
USB Interface: Four USB pin-header connectors, compliant with USB Specification Rev. 1.1 and support USB Hot-Plug function.
Watchdog Timer: Read I/O port 0843H to enable watchdog.; Read I/O port 043H to disable watchdog.; 10s, 20s, 30s and 80s timeout period selectable.

Applications

None Available

Aliases

None Available

ETOP ELECTRONICS Industrial Partner